Edit post Follow this blog Administration + Create my blog

Appliance Parts Store with Dishwasher Parts, Dryer Parts at a low price for all Appliance Parts and Supplies.

How to troubleshoot an ice maker that isn’t making ice

Expert recommendation on the way to restore a fridge ice maker that doesn’t make ice or doesn’t paintings at all. Also enables you to repair an ice maker this is frozen up or does now no longer eject ice. Includes the way to update an ice maker.

Troubleshooting and repairing an ice maker are jobs that do-it-yourselfers can cope with a bit little bit of guidance.

The maximum not unusual place hassle with an ice maker is that it doesn’t make ice. Other issues encompass an ice maker that won’t prevent making ice or freezes up. Here we start with the maximum not unusual place hassle—the ice maker stops making ice.

How to troubleshoot an ice maker that isn’t making ice:

  • Make certain the bailing twine above the ice tray is withinside the down position. When it’s up, it shuts off the ice maker.
  • Check the water delivery line underneath or in the back of the fridge. Be certain it isn’t kinked and is presenting water.
  • Be certain the little fill tube that fills the ice tray isn’t frozen. If it's miles, soften the icy tube with a hairdryer.
  • Look for ice withinside the ice mildew and make certain the motor that turns the ice ejection arm is working.
  • Check the faucet valve that connects the delivery tube to the water pipe.

Check the solenoid. For extra element approximately this and all the above steps, see below.
How An Ice Maker Works
But earlier than diving into coping with ice maker issues, let’s study how an ice maker works so you’ll have higher expertise of what is probably wrong.

An ice maker gets water thru a small, 1/4-inch water delivery line that runs from the fridge to a water pipe (or a water filter).

The water delivery line ends in the water fill valve withinside the fridge, which is managed with the aid of using an icemaker thermostat. The fill valve sends water thru a fill tube right into a mechanized ice maker meeting that consists of ice mildew. This is wherein the water freezes. Browse substitute elements on Amazon.

When the water freezes, the thermostat shuts off the water deliver thru a solenoid. Next, it activates a heater to barely heat the cubes so they'll launch from the ice mildew. Then it activates a small icemaker motor that rotates the ice ejection arm. The ejection arm pushes the ice cubes out of the mold and into the ice series bin. Consequently, the water fill valve activates for some seconds to top off the ice mildew again, and the cycle repeats.

When the ice series bin is full of ice, the ice increases a bailing twine, shutting off the ice maker unit till the ice stage withinside the bin drops.

Ice Maker Does Not Make Ice
If the water’s direction is blocked or the solenoid doesn’t paintings—or if the bailing twine is lifted—the ice maker won’t make ice. (Also observe that your home’s water stress won't be robust sufficient to serve an ice maker.)

Here are some steps you may take to get your ice maker working.

Make certain the bailing twine above the ice tray is withinside the down position. When it's miles locked withinside the top position, it shuts off the ice maker.

Check the water delivery line. If the ice maker doesn’t make ice however you may see the arm swing into motion and also you pay attention to a buzz for approximately 10 seconds, the water valve is soliciting for water that isn’t arriving. In this approach, the valve and the solenoid are in all likelihood okay, however, the water delivery is now no longer.  frigidaire refrigerator door panel
Be certain the water delivery line isn’t kinked in the back of or underneath the fridge (1/4-inch copper tubing is lots higher than plastic fill line to save you kinks). Find the water shut-off valve in the back of the fridge or below the sink, flip it off, unscrew the copper line from the again of the fridge, positioned the copper line in a bucket, switch on the valve, and notice if water pours out.

Ice Maker Does Not Turn Off
If your ice maker doesn’t flip off (it maintains making ice) even if the ice bin is full:

Lift the bailing twine to close off the ice maker, and dispose of the ice bin. Using a screwdriver if necessary, dispose of the ice maker, easy it thoroughly, after which reinstall it.
If the hassle persists, do not forget to change the ice maker and valve. You can do that yourself, as mentioned below, or have equipment restore individual do it. With this sort of hassle, you may have it repaired, however, it’s frequently wiser, simpler, and much less steeply-priced to update the unit entirely.

Ice Maker Repair: Ice Maker Frozen Up
If your ice maker has frozen up, take the subsequent steps to thaw it out:

Unplug the fridge or flip off the circuit breaker that elements electricity to it. Remove the ice bin from the fridge and dispose of any free ice from the ice maker.

Find the fill tube. This is a white rubber-like hose that provides water to the ice maker. Pull down the small metallic clip off the housing that holds the fill tube (eleven though now no longer all ice makers have this clip).  frigidaire refrigerator door panel

Warm the hose and surrounding mechanism. To do that, you may educate a hairdryer at the ice maker to soften any ice blocking off the mechanism. But be very cautious (sop up any dripping water with a rag) as power and water can gift a severe hazard of electrical shock. Also, be cautious now no longer to soften the plastic elements.

If you don’t need to apply a hairdryer, you may soak the deliver tubing with warm water, use a turkey baster, and catching the overflow in a bowl. In a few cases, it is able to be simpler to dispose of the ice maker than to thaw out the fill tube with the ice maker in place.

Share this post
To be informed of the latest articles, subscribe:
Comment on this post